New 2024 Chevrolet Silverado 3500 Work Truck WITH RACK DUMP Crew Cab 4WD 9' Morgan Truck Body

Upfit Notes

• PROSTAKE STAKE BODY 9FT NOMINAL
• SUBFRAME 3 IN. CROSSMEMBERS; CROSSMEIIABERS 12􀅍 CENTERS 6" CHANNEL LONGRAIL C35/K35 1 SINGLE AXLE
• 7• CHANNEL FOR PROSTAKE WITH HOIST
• CHAMPION C615T HOIST WITH ELECTRIC 0/A HYDRAULICS
• HOIST POWER CUT-OFF SWITCH MOUNTED IN CAB DASH
• HOIST BODY-UP SWITCH WITH INDICATOR LAMP AND BUZZER IN CAB
• #2GA BATTERY. GROUND CABLE AND CONNECTION STUDS TO INSTALL HOIST ON CHASSIS WITH 1 BATTERY LOCATED IN ENGINE COMPARTMENT.
• 6' HOIST CONTROLLER WIRE EXTENSION; EXTERNAL WIRE IN LOOM
• REAR RAIL SUPPORT FOR PROSTAKE UNIT WITHOUT REAR UNOERRIDE
• 42" HIGH WITH STEEL ROLL FORMED SLATS AND POSTS UNPAINTED-HOT DIPPED GALVANNIZED SPRING LATCH ON RACKS
• 42" HIGH GALVANIZED STEEL SWING RACKS WITH PAINTED PERMANENT POSTS AND RACK EDGES STEEL 42" HIGH WITH WINDOW PROSTAKE
• 24"X30" BLACK MORGAN WITH FLEET ENGR. ANTI SAIL BRACKETS
• 10 GA. SMOOTH STEEL PLATE WITH CROSSMEMBERS ON 12• CENTERS
• GM WARRANTY NOTE FOR ALL GM POOL CHASSIS
• NOTE: GENERAL MOTORS ("GM"") DOES NOT WARRANT MODIFICATIONS, EQUIPMENT, ACCESSORIES OR 1 PARTS NOT PERFORMED OR PROVIDED BY GM RELATED TO THIS ORDER.
• HITCH TUBE IS LOCATED 8.25" BEHIND REAR OF BODY. REF DRAWING CUST2105
• HITCH HEIGHT 18-221N. FROM CENTER OF RECEIVER TUBE TO GROUND
• 7-WAY RV BLADE STYLE WIRING PLUG RECEPTACLE INSTALLED ON HOIST BUMPER
• COMPONENTS USED FOR CHASSIS WIRING AND LIGHTS INTIGRND
• BASE FRAME AND LONG RAIL BLACK IMRON
• PAINT 42" PROSTAKE BULKHEAD IMRON BLACK
• STEEL ONLY FLOOR BLACK IMRON
• MORGAN LOGO AND SAFETY DECALS-SPNPROSTAKE/MHP BODYNEHICLE IDENTIFICATION PLATE WITHOUT PATENT NUMBERS
• CONSPICUITY TAPE INSTALLATION
• BOTH SIDES OF BODY, ACROSS REAR END PLATE, UNDERRIDE PROTECTOR, AND TWO INVERTED L's 1 ON THE UPPER CORNERS OF BULKHEAD. PER DRAWING CONSP0O
• BACK-UP ALARM VELVAC-697087
• CUSTOMER HAS DECLINED SIDE GUARD OPTION ON THIS ORDER